0AM927769D DQ200 Transmission Control Module
The 0AM927769D module is a DQ200 / 0AM transmission controller. It is a replacement electronics component for seven-speed DSG applications.
Product Overview
The 0AM927769D module is a DQ200 / 0AM transmission controller. It is a replacement electronics component for seven-speed DSG applications.

Product Specifications
| Reference number | 0AM927769D |
|---|---|
| Transmission family | DQ200 / 0AM |
| Transmission type | 7-speed DSG |
| Component | Transmission control module |
| Condition | New |
Application and Part Selection
Match the original controller number and hardware version to the vehicle's transmission. Include the software identification and programming requirements when arranging the replacement with your workshop.
Product Images



Request a Product Quote
Send the original module label, vehicle VIN, transmission code and required quantity. Include the workshop’s coding or programming requirements in the enquiry.
Contact TOSEN for a quotation or browse Transmission Control Units.
Function and Operation
The 0AM927769D is a transmission control module (TCU) for the DQ200 / 0AM seven-speed DSG transmission. The module is the electronic control unit that reads sensor inputs such as input and output shaft speed, selector position and clutch status, then commands the electrohydraulic mechatronic unit to select gears and engage the clutches. On the DQ200 DSG the control module and the hydraulic actuator are separate assemblies, so the 0AM927769D is the electronics component used when a fault is traced to the control side rather than to the hydraulics.
- Component: Transmission control module (TCU)
- Transmission family: DQ200 / 0AM, seven-speed DSG
- Reference number: 0AM927769D
- Role in the system: reads transmission sensor data and controls shift and clutch actuation
Vehicle Compatibility Notes
The 0AM927769D transmission control module is specified for vehicles running the DQ200 / 0AM seven-speed DSG transmission, a dual-clutch family widely used in Volkswagen Group applications. The DQ200 was built in several hardware and software versions across its production life, so the control module must be matched to the transmission by part number and hardware version rather than by vehicle model alone. Confirm the number on the original module and the transmission code before ordering.
- Transmission family to match: DQ200 / 0AM
- Transmission type to match: seven-speed DSG
- Primary check: the controller number on the original module label
- Secondary checks: hardware version and software identification against your original unit
Quality and Inspection at TOSEN
The 0AM927769D transmission control module is supplied as a new component. TOSEN sources DSG electronics through a factory-direct channel and checks units against the reference number and connector arrangement described on this page before dispatch. For distributors building a stock profile, sample orders are accepted so the correct hardware version can be confirmed before a full order is placed.
Frequently Asked Questions
What transmission does the 0AM927769D control module fit?
The 0AM927769D is a transmission control module for the DQ200 / 0AM seven-speed DSG transmission, a dual-clutch gearbox used across Volkswagen Group vehicles. You should confirm the number on your original module matches 0AM927769D and that your transmission is a DQ200 before ordering the replacement control module.
How do I know if my DQ200 fault is the control module or the mechatronic unit?
On the DQ200 DSG the transmission control module is the electronics and the mechatronic unit carries the hydraulic actuators. A diagnostic scan that isolates a control-side fault points to the 0AM927769D module, while hydraulic or clutch-actuation faults point to the mechatronic assembly, so read the fault codes before choosing the part.
Does a replacement DSG control module need to be coded?
A replacement transmission control module generally needs coding or adaptation to the vehicle after installation, because the module carries software that must match the transmission and vehicle configuration. Send TOSEN the original module label, vehicle details and your workshop’s programming requirements so the correct version is supplied.
Can I replace just the control module on a DQ200 transmission?
Yes, the DQ200 DSG is built so that the transmission control module can be replaced as a separate electronics component when the fault is confirmed to be on the control side. Because the mechatronic hydraulics are a different assembly, a diagnostic check should confirm the fault location before you order the 0AM927769D module.
| Reference number | 0AM927769D |
|---|---|
| Transmission family | DQ200 / 0AM |
| Transmission type | 7-speed DSG |
| Component | Transmission control module |
| Condition | New |
Shipping Information
All orders are shipped via international freight forwarders with full tracking. Standard lead time is 15–25 business days depending on destination. Express shipping options available for urgent orders.
Returns Policy
Products are inspected before shipment and packed to international standards. In case of shipping damage or manufacturing defect, please contact our support team within 30 days of receipt with photos for assessment.