7701473353 Bare Cylinder Head for Renault

The 7701473353 bare cylinder head is for Renault engine rebuilding applications in the K4M / K4J families. Select the head using the complete engine code and original head reference.

Compare the oil and coolant passages, camshaft arrangement and sensor openings. For a bare-head order, list any valves, camshafts or other components needed alongside the casting.

Send the full engine code, cylinder-head number, casting photographs and quantity. Specify a bare head or the valvetrain components required with the order.

Contact TOSEN for a quotation or browse Cylinder Heads.

The 7701473353 bare cylinder head is the head casting offered for Renault engine rebuilding in the K4M and K4J families, ordered as a bare component rather than as a fully dressed assembly. The casting closes the engine, presents the combustion chambers and the head face, and carries the camshaft arrangement, the sensor openings and the oil and coolant passages in the positions the K4M and K4J engines expect. The complete engine code and the original head reference select the casting for a given engine.

• Reference number: 7701473353
• Component: bare cylinder head for Renault engine rebuilding
• Engine application families: Renault K4M and K4J
• Supply form: head casting, with valvetrain components listed separately

Compatibility for the 7701473353 head runs through the complete engine code of the Renault being rebuilt and the original head reference taken from the engine. The oil and coolant passages are compared for position, the camshaft arrangement is checked against the caps and journals the engine uses, and the sensor openings are matched to the sensors the vehicle carries. Orders list any valves, camshafts or other components needed alongside the casting, so the bare head arrives with exactly the dressing the workshop plans.

• Identification pair: complete engine code and original head reference
• Passage checks: oil and coolant passage positions
• Mechanical check: camshaft arrangement
• Order contents: casting plus separately listed valves, camshafts and other components

Each bare head supplied against the 7701473353 reference is inspected as a casting before dispatch. The engine code and the head reference supplied with the enquiry are read together, the passage and sensor positions are reviewed against the details recorded from the original, and the camshaft arrangement is checked so the caps and journals agree with the K4M or K4J engine named in the order. Components ordered alongside the casting are packed with the head.

What is the 7701473353 bare cylinder head?

The 7701473353 bare cylinder head is the head casting supplied for Renault engine rebuilding in the K4M and K4J families, ordered without the valvetrain assembled onto it. The casting carries the combustion chambers, the camshaft arrangement, the sensor openings and the oil and coolant passages for those engines. The complete engine code and the original head reference confirm the correct casting for a specific Renault engine.

What does a bare head include for a Renault rebuild?

Bare describes the supply form of the component: the casting itself, with valves, camshafts and other valvetrain parts ordered separately and listed explicitly in the enquiry. A workshop planning its own dressing orders the casting and names each part it intends to fit, and the order then carries the casting plus the listed components. The bare form gives the rebuilder direct control over the assembly scope.

Which Renault engines does reference 7701473353 serve?

Reference 7701473353 serves Renault engines in the K4M and K4J families, and the complete engine code decides which engine within those families a given head suits. The original head reference from the engine confirms the casting, and the passages, the camshaft arrangement and the sensor openings are compared with the removed head. The code and the reference together place the head in the correct family and version.

How is a bare-head order prepared?

A bare-head order states the complete engine code, the original head reference and the quantity, then lists the valves, camshafts and any other components the workshop plans to fit alongside the casting. Photographs of the removed head and its marks support the identification. TOSEN quotes the casting with the listed components, so one order covers the bare head and its intended dressing.