23111-2G200 Crankshaft for Hyundai G4KE Applications

The 23111-2G200 crankshaft is offered for Hyundai G4KE engine replacement enquiries. Match the original crankshaft number and engine production details when selecting the part.

Compare the journal dimensions, rear flange and timing-end arrangement with the original unit. For a rebuild, include the bearing size and the engine identification in the order information.

Send the engine code, crankshaft number, journal dimensions and quantity. Clear photographs of the front end, rear flange and identification marks help describe the required part.

Contact TOSEN for a quotation or browse Crankshafts.

The 23111-2G200 crankshaft is the replacement crankshaft referenced for Hyundai G4KE engine applications, forming the rotating core that a rebuild renews. Within the G4KE engine, the shaft converts piston and connecting-rod motion into continuous rotation, runs on its main journals in the block and its connecting-rod journals at the rods, and presents a rear flange and a timing-end arrangement that must line up with the surrounding engine components. Installing the reference restores the geometry at the centre of the engine.

• Reference number: 23111-2G200
• Engine application: Hyundai G4KE
• Component type: engine crankshaft for replacement and rebuilding
• Key interfaces: main and connecting-rod journals, rear flange, timing-end arrangement

Confirmation for a G4KE application runs from the engine identification down to the shaft itself. The engine code establishes that the unit in the workshop is a G4KE, the crankshaft number stamped on the original component is checked against the 23111-2G200 reference, and the journal dimensions, the rear flange and the timing-end arrangement are compared with the outgoing shaft so nothing depends on appearance alone. Engine production details travel with the check, because production variation within an engine family can alter which crankshaft a given engine carries.

• Engine identification: the G4KE engine code recorded from the vehicle
• Part confirmation: crankshaft number checked against reference 23111-2G200
• Compared features: journal dimensions, rear flange, timing-end arrangement
• Supporting details: engine production information supplied with the order

Each 23111-2G200 crankshaft supplied for G4KE work carries a warranty of 12 months and is inspected against the engine identification in the enquiry. The inspection covers the journal dimensions, the rear flange and the timing-end arrangement as reported for the original shaft, and a rebuilding order benefits from stating the bearing size alongside the engine identification so the shaft and the bearings arrive as a matched set for the engine being rebuilt.

What is the 23111-2G200 crankshaft for G4KE applications?

The 23111-2G200 crankshaft is the engine crankshaft referenced for Hyundai G4KE applications, supplied by TOSEN as a replacement component for engine repair. The shaft carries the main and connecting-rod journals, the rear flange and the timing-end arrangement that the G4KE engine expects, and the warranty cover is 12 months. Matching the stamped crankshaft number and the engine production details keeps the replacement correct for the engine being rebuilt.

How is a G4KE engine identified before ordering this crankshaft?

The G4KE engine is identified from the engine code recorded for the vehicle, which is the first detail an enquiry should state. The crankshaft number stamped on the original shaft is then matched to the 23111-2G200 reference, and the engine production details are added so the specification can be tied to the production period of the unit. Those three details together confirm that the crankshaft ordered belongs to the engine in the workshop.

Which measurements matter most for a G4KE crankshaft replacement?

The journal dimensions come first, covering both the main journals and the connecting-rod journals, because they set how the shaft runs in the block and the rods. The rear flange and the timing-end arrangement follow, since the flange mounts the flywheel interface and the timing end drives the valve gear. Comparing all of those against the original G4KE crankshaft, with the bearing size noted for the rebuild, completes the measurement set.

What should a G4KE crankshaft order contain?

An order should state the G4KE engine code, the 23111-2G200 crankshaft reference, the journal dimensions taken from the original shaft and the quantity required. For a rebuilding project, the bearing size and the engine identification belong in the order information as well. Supplying those details lets TOSEN process the crankshaft enquiry against the correct engine specification and return an accurate quotation.