33030-0W641 G55 Manual Transmission for Toyota Hiace

The 33030-0W641 reference identifies a G55 manual transmission application for Toyota Hiace. Use the complete reference and original gearbox identification when arranging a replacement.

Compare the input shaft, output arrangement, bellhousing and mounting points. Include the vehicle's chassis code and engine identification with the gearbox enquiry.

Send the vehicle and engine identification, gearbox code, connection photographs and quantity. Include the destination and the components required with the transmission.

Contact TOSEN for a quotation or browse Manual Transmissions.

The 33030-0W641 is a complete manual transmission assembly built on the Toyota G55 gearbox family and specified for Toyota Hiace applications. The G55 is a floor-shift manual gearbox in which the driver selects ratios through an internal rail-and-fork mechanism acting on synchronised gear hubs. The reference 33030-0W641 is a Toyota assembly number covering the gearbox as a serviceable unit rather than a single internal part, so it identifies the complete transmission that bolts between the engine and the driveline of the vehicle. Power enters the case through the input shaft and clutch housing at the front, passes through the selected gear pair, and leaves through the output shaft at the rear of the case toward the propeller shaft.

• Reference number: 33030-0W641 — a complete gearbox assembly number, not a single internal component
• Transmission family: G55
• Vehicle application: Toyota Hiace
• Role in the system: transmits engine torque to the driveline through the selected manual gear ratio

The 33030-0W641 G55 gearbox is specified for Toyota Hiace applications. Hiace vans were produced over a long run with several engine families and gearbox variants, so two vehicles carrying the same model name can be fitted with different transmission hardware. The reliable way to confirm fitment is to compare the complete assembly number, 33030-0W641, and the G55 family marking against the identification on your original gearbox, and then to verify the physical interfaces a workshop can see: the input shaft spline, the bellhousing and clutch housing pattern, the output arrangement and the mounting points. Racing or van-based conversions that use a different engine can shift the correct gearbox choice, so quoting the assembly number and the vehicle details together gives the most dependable match.

• Reference to match: 33030-0W641 — quote the complete number
• Transmission family to match: G55
• Vehicle application to match: Toyota Hiace
• Primary checks: input shaft spline, bellhousing and clutch housing pattern, output arrangement
• Secondary checks: mounting points, gear lever position and speedometer drive against your removed assembly
• Workshop planning: include the Hiace model, engine identification and original gearbox number in the enquiry

The 33030-0W641 G55 manual transmission is supplied as a new assembly. TOSEN sources G55 gearboxes through a factory-direct supply channel and checks each unit against the reference number 33030-0W641, the G55 family marking and the input, output and mounting arrangement described on this page before dispatch, so that the assembly corresponds to the Hiace application stated in the order. The unit is covered by the 12 months warranty stated in the specification table above. Distributors and workshops servicing Toyota vans can request a sample so the case and interface configuration are confirmed against the original before a larger order is placed.

What does reference 33030-0W641 identify?

Reference 33030-0W641 identifies a complete G55 manual transmission assembly for Toyota Hiace applications. It is an assembly-level number, meaning it covers the gearbox as a whole serviceable unit rather than an individual internal component such as a gear or a shaft. When ordering, quote the complete number 33030-0W641 and confirm the G55 family marking on your original gearbox so the correct assembly is supplied.

Which Toyota Hiace does the G55 33030-0W641 gearbox fit?

The G55 gearbox under reference 33030-0W641 is specified for Toyota Hiace applications. Because the Hiace ran through several engine and gearbox variants, confirm the complete assembly number and the G55 marking against your original unit, and check the input spline, bellhousing pattern, output arrangement and mounting points. Supplying the Hiace model and engine identification lets the assembly be matched to your vehicle.

Is 33030-0W641 a complete gearbox or a spare part?

33030-0W641 is a complete gearbox assembly number, not a single spare part. It covers the G55 manual transmission as a serviceable unit that bolts between the engine and the driveline. If your requirement is for an internal component such as a gear, shaft or synchroniser rather than the complete transmission, state that separately so it can be quoted against the individual part number for your G55 unit.

What warranty applies to the 33030-0W641 G55 transmission?

The 33030-0W641 G55 manual transmission is supplied new and covered by the 12 months warranty stated in the specification table on this page. To keep the warranty valid, fit the assembly as a complete unit and follow the standard installation practice for the Hiace application. Include your vehicle details and the original gearbox number in the enquiry so the correct configuration is confirmed before dispatch.