The JF011E, identified as RE0F10A in Nissan applications, is a Jatco continuously variable transmission family fitted to Dodge, Mitsubishi and Nissan vehicles, and the unit is procured at TOSEN as a complete assembly covering the pulley set, the steel belt, the hydraulic control and the electronic control. Buyers who source this CVT family in volume need one working method for the whole family: read the original transmission label, record the drive layout and output connections, and order against those recorded identifiers rather than against a vehicle model name. This complete guide sets out what the assembly contains, why the same family carries different names across brands, how to verify the correct unit before ordering, and what TOSEN checks before a JF011E / RE0F10A CVT transmission assembly leaves the factory.
Quick summary: the JF011E / RE0F10A is one CVT family with a Jatco code and a Nissan application name; the assembly is supplied new as a complete unit; fitment is confirmed by the original transmission label, the vehicle drive layout and the output connections; export buyers can qualify a sample before a full order. Full details and quotations: JF011E CVT transmission assembly for Dodge, Mitsubishi and Nissan.
What the JF011E / RE0F10A Assembly Contains
The JF011E is a continuously variable transmission family, also identified as RE0F10A in Nissan applications. Unlike a conventional automatic that shifts between fixed gear ratios, a CVT uses a steel belt running between two variable-width pulleys to provide a continuous range of ratios, which keeps the engine at an efficient speed under varying load. The stepless character of the unit is the reason it is identified, selected and ordered differently from a geared automatic: there is no gear count to quote and no ratio chart to compare, so the buying decision rests on the family identification and the physical configuration of the unit.
At assembly level, the JF011E / RE0F10A unit covers four working groups that together manage ratio change:
- The pulley set — two variable-width pulleys between which the steel belt runs.
- The steel belt — the element that transmits drive between the pulleys across the continuous ratio range.
- The hydraulic control — the pressure circuit that varies pulley width.
- The electronic control — the control arrangement that works with hydraulic pressure to manage ratio change.
Hydraulic pressure and electronics manage pulley width and ratio change, so the four groups function as one calibrated unit. That is why TOSEN handles this product as a transmission assembly enquiry: the useful commercial question is not which single part is required, but which complete assembly configuration matches the vehicle, and which accompanying components the repair also needs.
The assembly-level view also shapes how a replacement decision is scoped. Because the pulley set, belt, hydraulic control and electronic control work together to manage ratio change, a vehicle that needs a replacement JF011E / RE0F10A unit is normally quoted at assembly level, with the accompanying components listed separately alongside the transmission itself. When requesting a quotation, buyers specify the transmission assembly and the accompanying components required for the repair, which keeps the technical scope of the order visible from the first enquiry. This is also why the recorded identifiers matter twice over: they select the assembly configuration, and they define what the accompanying components must match.

Why One CVT Family Carries Different Names
The JF011E / RE0F10A CVT family was specified for Dodge, Mitsubishi and Nissan applications, where the same transmission family was used under different manufacturer names. The JF011E code is the Jatco family designation, while RE0F10A is the identification used in Nissan applications. For a buyer, the naming overlap has one practical consequence: a vehicle model name alone does not identify the unit, because the family was produced with different casings, output connections and electronic control arrangements across its production.
The reliable identification path is therefore physical, not nominal. The table below shows the four identifiers TOSEN asks buyers to record before an assembly enquiry:
| Identifier to record | Where it comes from | Why it matters |
|---|---|---|
| Transmission family | Original transmission label on the unit | Confirms the JF011E / RE0F10A family rather than a nominal model match |
| Drive layout | Vehicle documentation and the installed unit | The same family was produced in different installation configurations |
| Output connections | Physical inspection of the original unit | Casings and output connections differ across production |
| Vehicle identity | VIN and transmission identification | Lets the supplier verify fitment before purchase |
Because the assembly was produced with different casings, output connections and electronic control arrangements, two vehicles that both carry “the same” CVT family can require assemblies that are not interchangeable. Recording the four identifiers above converts a guess into a verified match. Buyers ordering through the JF011E / RE0F10A transmission assembly product page can send the transmission label and vehicle details so fitment is verified before purchase.
How to Verify the Correct Assembly Before Ordering
Verification for this CVT family follows a fixed sequence, and each step narrows the assembly configuration. The gearbox casing, the electronic control arrangement and the installation configuration are all part of selecting the correct assembly, so the sequence below is worth following in order:
- Read the transmission identification from the original unit label and confirm it matches the JF011E / RE0F10A family.
- Record the vehicle drive layout as installed, not as advertised by the model name.
- Record the output connections on the original unit, together with the electronic control arrangement.
- List the accompanying components the repair requires in addition to the assembly.
- Send the VIN, the transmission identification, the drive layout and the quantity with the enquiry, and ask for fitment verification before purchase.
This sequence exists because the same CVT family was used across Dodge, Mitsubishi and Nissan applications. A model-name match can point to the right family and still leave the casing, output connection and control arrangement unresolved, and those three details are exactly what separates an installable assembly from a wrong shipment. The verification work is short — a label, a layout note, a connection sketch and a VIN — and it is the difference between a confirmed order and a return.
Two gaps come up most often when a verification sequence is rushed. The first is stopping at the family code: confirming JF011E / RE0F10A identifies the correct transmission family, but the same family was produced with different casings, output connections and electronic control arrangements, so the code alone does not finish the job. The second is trusting the model name across brands: a Dodge, a Mitsubishi and a Nissan application can share the family name while differing in the installation configuration that decides whether an assembly bolts in. Recording the drive layout and output connections closes both gaps before an enquiry is placed, and gives the supplier everything needed to verify fitment before purchase.
What TOSEN Checks Before Dispatch
The JF011E / RE0F10A CVT transmission assembly is supplied as a new assembly. TOSEN handles transmission assemblies through a factory-direct supply chain and checks units against the transmission identification and installation configuration described above before dispatch. For buyers, that means the recorded identifiers are not just an intake formality: the same details are used on the outbound side to confirm that the unit matching the enquiry is the unit that ships.
Buyers shipping to export markets can request samples for qualification, so the correct drive layout and output connections are confirmed before a full order is placed. A sample qualification run is a practical way to validate the identification sequence on a physical unit: the buyer reads the label, checks the connections against the recorded notes, and only then commits the full quantity. When requesting a quotation, specify the transmission assembly and the accompanying components required for the repair, so the commercial scope and the technical scope of the order stay aligned.
TOSEN also stocks the wider Automatic Transmissions range for buyers who maintain mixed fleets, and quotations for this family start from the contact page.
Frequently Asked Questions
What is the JF011E / RE0F10A transmission?
The JF011E is a continuously variable transmission (CVT) family that also carries the RE0F10A identification in Nissan applications. A steel belt running between two variable-width pulleys gives the unit its stepless ratio range, and the same transmission family was fitted to Dodge, Mitsubishi and Nissan vehicles under those different manufacturer names.
What does a complete JF011E CVT assembly include?
A complete JF011E / RE0F10A transmission assembly covers the pulley set, the steel belt, the hydraulic control and the electronic control that together manage ratio change. Hydraulic pressure and the electronics vary pulley width during operation, so the assembly is ordered as one functioning unit rather than as a loose collection of parts.
How do buyers confirm the correct JF011E assembly before ordering?
Matching starts with the transmission label on the original unit, confirmed against the JF011E / RE0F10A family, and continues with the vehicle drive layout and the output connections. Because the family was produced with different casings and electronic control arrangements, the model name alone is not a reliable selection key for this CVT.
Can export buyers qualify a JF011E assembly with a sample before a full order?
Export buyers shipping to overseas markets can request samples for qualification, so the drive layout and output connections are confirmed on a physical unit before a full order is placed. TOSEN handles the JF011E / RE0F10A assembly through a factory-direct supply chain and checks each unit against the transmission identification before dispatch.
Need a JF011E / RE0F10A CVT transmission assembly for a Dodge, Mitsubishi or Nissan application? Send the vehicle VIN, the transmission identification, the drive layout and the quantity to TOSEN for a quotation, and specify the assembly and accompanying components the repair requires.


