ME610458 synchronizer ring assembly for Mitsubishi Fuso
ME610458 synchronizer ring assembly for Mitsubishi Fuso — TOSEN AUTO supply reference.

The ME610458 Fuso synchronizer ring is an assembly-level reference: the genuine catalogue names it a Ring Assy Synchronizer, and the reference gathers the synchronizer ring together with the elements associated with its position in one matched grouping. It serves the second and third gear synchronizer position of Mitsubishi Fuso manual gearboxes, and the TOSEN AUTO catalogue lists it for the M6 42T heavy-duty gearbox carried by the Fuso FE659.

That scope detail decides what arrives in the box, so this guide fixes it first, then anchors the application, walks the verification workflow that proves the part before payment, settles the assembly-versus-single-ring decision, and ends with an enquiry checklist a workshop or wholesaler can send as-is.

What the ME610458 Reference Covers

ME610458 is a synchronizer ring assembly for Mitsubishi Fuso gearboxes. The genuine catalogue name for the part is Ring Assy Synchronizer, and the reference is supplied as one matched grouping rather than as a loose collection of parts: the ring arrives together with the synchronizer elements associated with that position, so the delivery matches the way the components work together in the gearbox. What the grouping contains follows the gearbox documentation – the elements the documentation assigns to that position travel with the ring, and a variant carried by a different gearbox designation can group a different set. The removed assembly is therefore the reference for what should arrive, and an assembly reference is still a part-level unit, below a complete synchronizer and below a gearbox.

Three order scopes for one synchronizer position
Order scope What arrives Order it when Limit to watch
Single synchronizer ring One friction ring for one position Only the ring is worn and the rest of the assembly measures clean Neighbouring parts stay in place – they must be inspected, not assumed
ME610458 ring assembly The ring grouped with the associated elements of its position, one matched unit Wear shows across the whole grouping at the position Composition follows the gearbox documentation for the position
Complete synchronizer unit Hub, sleeve and synchronizer elements as a full unit The position needs a full rebuild per the gearbox documentation Scope and reference follow the documentation for the gearbox on the bench

At rebuild level the difference is practical. A ring order replaces one friction component; an assembly order replaces the grouping that wears with it; a complete unit replaces the whole position. Because market listings title the same number now as a ring, now as a ring assembly, the scope is worth confirming in writing before the order is placed – the enquiry step later in this guide does exactly that.

Where the ME610458 Fits: Gearbox, Position and Application

The TOSEN AUTO catalogue lists this part as a synchronizer ring for the Mitsubishi Fuso M6 42T heavy-duty gearbox, carried by the Fuso FE659 – the catalogue listing code reads 42T ME610458 FE659 M6. Parts catalogues that carry the reference identify it as the ring for the manual transmission’s second and third gear synchronizer. The two gears share one synchronizer position, so one ring grouping serves shifts in both directions at that position, while the other positions in the same gearbox carry their own references with different geometry.

Item What the record says
ME610458 Synchronizer ring assembly reference; genuine naming Ring Assy Synchronizer
M6 42T gearbox Mitsubishi Fuso heavy-duty gearbox designation in the TOSEN AUTO catalogue
2nd & 3rd gear position One synchronizer position serving both gears of the manual transmission
Fuso FE659 Application listed in the TOSEN AUTO catalogue for this reference

Application is where wrong-variant orders start. The Fuso truck range carries several manual gearboxes across models and years, and a ring matched to one gearbox will not serve another even when the trucks look identical in a photo. That is why the selection runs through the complete reference number and the gearbox identification together, rather than the truck model alone – the identification resolves the variant the model name leaves open.

The Verification Workflow Before You Order

  1. Record the reference in full – ME610458, complete, read from the gearbox documentation or the removed part. A shortened or partial reference can point to a different ring within the same family, because Fuso gearboxes carry several synchronizer positions, each with its own references.
  2. Record the gearbox identification with the enquiry – the designation on the gearbox, not the truck model name. The designation carries the synchronizer configuration the ring must match.
  3. Compare the geometry with the removed assembly – the ring diameter, the engagement teeth and the cone profile are the three features that define the fit at the position, taken from the part that came out of the gearbox.
  4. Check the markings on the removed parts – where the old components carry stamped or cast numbers, those markings support the reference check and catch a variant the listing missed.
  5. Photograph the original and its mating components – the photos complete the record and let the supplier desk verify the match before anything ships.

The geometry check is comparative by design: for this reference, published nominal dimensions and wear limits are not available to buyers, so the removed assembly is the working specification, and the nominal figures live in the service documentation for the gearbox being rebuilt. One caution belongs beside the number itself: aftermarket listings sometimes carry a second ME reference beside ME610458 in the same title. Those pairings do not make the numbers interchangeable, and a listing title is not a cross-reference document. Quote the complete reference from your own documentation, state the gearbox identification, and let the scope be confirmed against both at the enquiry – not assumed from a listing.

The same discipline runs on the supplier side. TOSEN checks every ME610458 enquiry against the complete reference number and the gearbox identification supplied by the buyer, reviews the ring diameter, engagement teeth and cone profile recorded from the removed assembly, and issues the quotation on the same details the match was made from. The measured approach is standard synchronizer work: Eaton's service manual for its own synchromesh transmissions calls careful inspection of every part essential to gearbox life, which is why the geometry comparison – not the listing title – carries the decision. The ME610458 synchronizer ring product page runs this check from the supplier side before any quote is issued.

Ring, Assembly or Full Synchronizer: Choosing the Order Scope

Measured wear across the grouping sets the scope – not the price difference between the options. The rule is short: wear that shows across more than the ring itself calls for the assembly reference, because the grouping is replaced as the unit it wears as; a ring-only order stands only when the rest of the position measures clean; and a position worn throughout takes the complete synchronizer unit per the gearbox documentation.

Choosing the order scope by what the teardown shows
Teardown finding Order scope Why
Only the ring scored; mating elements clean Single synchronizer ring The narrower repair – the rest of the position stays in service
Wear across the ring and its associated elements ME610458 ring assembly The grouping wears together; replacing it as one unit protects the labour already paid
Position worn throughout, per the gearbox documentation Complete synchronizer unit The documentation, not the parts price, sets the scope for a full position rebuild

The reason to be strict about the measurement is the repeat failure: a new ring working against worn mating elements fails early, and the gearbox comes apart a second time. If you are still establishing which part at the position has failed, the ring versus cone versus sleeve identification guide sorts the three look-alike parts first, and the synchronizer ring wear symptoms guide maps the shift complaints to their causes before the bench work starts. Measure the parts, then order the scope the measurements support.

Batch Orders, Samples and the Enquiry Checklist

  • The complete reference number – ME610458, in full, from the documentation or the removed part
  • The gearbox identification recorded with the enquiry
  • Geometry from the removed assembly – ring diameter, engagement teeth, cone profile
  • The gear position being serviced – second and third at this synchronizer
  • The quantity required, per position and per gearbox variant
  • The delivery destination, so the quotation covers freight
  • Photographs of the original ring and its mating components

For wholesale orders, add one discipline before volume: qualify a sample first. Compare the sample against the original on the same geometry points, confirm the reference and the scope on the sample, and require the production batch to match the approved sample. A batch that differs from its sample in tooth form or cone profile turns a stock order into a row of gearboxes waiting on parts, so the sample step protects both sides of the order. TOSEN reviews each ME610458 enquiry against the reference, the gearbox identification and the recorded geometry before quoting – the request-a-quote form on the ME610458 synchronizer ring page takes these fields directly, and the transmission parts category covers the neighbouring components a wider rebuild needs.

When the delivery arrives, spend one minute on the same records. Match the delivered grouping against the photographs and numbers from the teardown, check the finish on the friction surfaces, count the grouping against the scope that was ordered, and inspect for transit damage before the gearbox goes back together. At assembly, follow the lubrication practice the workshop manual for the gearbox sets for synchronizer parts – every friction surface lubricated with the specified oil before the first shift – and the arrival check is done.

A complete enquiry, at a glance

One reference, quoted in full: ME610458.

One gearbox identification, not a truck model name.

One geometry record: ring diameter, engagement teeth, cone profile.

One scope decision, made from the teardown measurements.

One quantity and destination, plus photographs of the original.

Frequently Asked Questions

Is the ME610458 a single synchronizer ring or a set?

An assembly, not a loose ring. The reference covers the ring together with the elements the gearbox documentation groups at its position, delivered as one matched unit. What exactly travels in the grouping is read from the gearbox identification at the enquiry, and the unit sits below a complete synchronizer in scope.

Which gears does the ME610458 synchronizer serve?

The second and third gears, which share one synchronizer position in the manual transmission. Because both shifts run through the same position, one grouping serves them in both directions. The remaining positions in the gearbox are not covered by this reference – each carries its own number and geometry.

Can I order the ring by the Fuso model name alone?

No. The Fuso range carries several manual gearboxes across models and years, and selecting a ring from the truck model alone leaves the version open. Record the gearbox identification – the designation on the gearbox – together with the complete reference number, and the variant is resolved before the order is placed.

Why do some listings show another ME number beside ME610458?

Because parts sellers often list related ME numbers side by side to widen their search reach. That pairing is a marketing convention, not an interchangeability statement – the numbers may serve different positions or variants. Treat your own documentation and the gearbox identification as the authority, and let the supplier confirm the scope against both.

Should I order the assembly or just the ring?

Measure the whole grouping, then order what the measurements condemn. Assembly when the wear extends past the ring itself; ring only when the mating elements still measure clean. The cheaper option that leaves a worn mating surface in place buys a second teardown, not a saving.

What should a wholesale enquiry include?

The complete field set: reference in full, gearbox identification, geometry from the removed assembly, gear position, quantity and destination, plus photographs of the original. Qualify a sample against the original before volume, and require the production batch to match the approved sample.

Order the Scope Your Rebuild Actually Needs

ME610458 is an assembly-level reference for the second and third gear synchronizer position of a Fuso manual gearbox – the M6 42T designation on the FE659 in the TOSEN AUTO catalogue. The complete reference, the gearbox identification and the geometry from the removed assembly are the three records that make the first order the correct one, and the teardown measurements set the scope: ring, assembly, or the full unit.

Send the checklist fields – complete reference, gearbox identification, geometry from the removed assembly, gear position, quantity and destination – through the request-a-quote form on the ME610458 synchronizer ring product page for a fitment-confirmed quotation. Not ready to order yet? Hand the same checklist to whichever supplier quotes the job – the fields that confirm the fitment stay identical whoever ships the part.

TE
TOSEN AUTO Editorial
Automotive Parts Experts
The TOSEN AUTO editorial team publishes product guidance, buying guides and technical insights for the automotive aftermarket.